How to open the glue cartridge ?
- Remove the round cap of the bond cartridge and let the rectangular end piece.
- Place the cartridge vertically : front down.
- Type strongly the part on a flat surface so that the hole is well drilled.
- Remove the rectangle tip and put a cannula.
- Before using, eliminate approximately half of the cannula of product, so that the 2 components are well mixed.
How to apply the glue ?
Material needed : 1 gun, 1 bond cartridge, 1 mixing cannula, 1 wood block, 2 gloves
Clean and prepare the claw.
Apply the bond on to the block, wait 2 seconds then put the block on the hoof.
Be sure the thickness between the bond and the claw is equal to 3 mm.
You can adjust and handle the block during a few seconds for an optimal putting. After 30 seconds, the block is fixed.
After 3 minutes the cow can be released.
Advices after application :
The cannula serve as a cap after application : let it on the cartridge until the next use. You will just need to change the cannula.